Precision TA500 Manuel D'utilisation page 6

3.. On the short side of the Axle, place two 3/4" Flat Washer onto the Axle, followed by an Axle Spring and then an-
other 3/4" Flat Washer, followed by an Aerator Star and then another 3/4" Flat Washer onto the Axle. Place a 1" x 3"
Spacer onto the Axle, a 3/4" Flat Washer another Aerator Star and another 3/4" Flat Washer repeat this process three
more times. Now place a 1" x 2" Spacer onto the Axle followed by another 3/4" Flat Washer. See Figure 3.
1" x 3" Spacer
1" x 3" Spacer
Aerator Star
Aerator Star
Aerator Star Aerator Star
3/4" Flat Washer
3/4" Flat Washer
1" x 2" Spacer
1" x 2" Spacer
Axle
Axle
Spring
Spring
3/4" Flat Washer
3/4" Flat Washer
Figure 3
Figure 3
6