Assembly - Precision TA500 Manuel D'utilisation

Assembly Instructions
Tools Required for Assembly
Minimum
(2) Adjustable Wrenches
(1) Allen Wrench
Remove from Carton
Remove and layout all parts and hardware packages from the carton. Identify them using the illustrations on
pages 2 and 3.
1. Place the Base Plate on a flat surface, insert a 5/16" x 3/4" Hex Head Bolt into the top right hole, then insert the
bolt into the corresponding hole of the Tow Bar. Place a 5/16" Lock Washer onto the bolt and secure with a 5/16"
Hex Head Nut. Next align the Center Plate with the two remaining holes. Insert 5/16" x 3/4" Hex Head bolts through
the holes in the Base Plate and the corresponding holes of the Tow Bar and Center Plate. Place a 5/16" Lock Washer
onto each bolt and secure with 5/16" Hex Head Nuts. Insert a 3/4" Axle Bushing into the Center Plate. See Figure 1.
Base Plate
Base Plate
Figure 1
Figure 1
Center Plate
Center Plate
5/16" Hex Head Nut
5/16" Hex Head Nut
5/16" Lock Washer
5/16" Lock Washer
5/16" Hex Head Bolt
5/16" Hex Head Bolt
4
5/16" x 2-1/4"
Hex Head Bolt
3/4" Axle Bushing
3/4" Axle Bushing
5/16" Nylock
Nut
Tow Bar
Tow Bar