BH CORE Manuel page 27

EN
USER MANUAL
C) Start-up profile.
The user can select the system start-up settings. Every time that the user turns the display panel on and off,
the system will change the settings to those selected on this menu:
Secondary information
Assistance mode Resetting of trip information
Auto power-off
Sets the display's
auto power-off time.
D) Screen brightness E) Metric and imperial
selection. systems.
The user can alter the brightness The user can switch between the
of the screen so that they can metric system (kilometres) and
view it correctly. imperial system (miles).
52
CORE
F) Battery status.
On this menu, the user can view
the state of deterioration of the
battery and manage the bike's
assistance modes.
CORE
The battery is a consumable that degrades over time and with use, gradually losing its energy
storage capacity.
The state of deterioration of the battery (State of Health) offers information about the speed of the
battery's degradation based on the following colour criteria:
Green. Deterioration is low.
Orange. Deterioration is moderate.
Red. Deterioration is high.
G) Motor settings.
On this menu, the user can manage the motor's performance for each assistance mode.
Assistance level by mode.
This is the minimum (1%) and maximum
(100%) percentage level of assistance
offered by the motor.
H) Wheel size selection.
The user can change the size
of the wheel at any time.
EN
USER MANUAL
Acceleration.
There are 3 levels (Low, Medium, High)
that represent the level of acceleration
when starting up the motor.
I) Language selection.
The user can change the screen
language.
53