Suitable Charging Environments; Unsuitable Charging And Discharging Environments And Solutions; Battery Charging Process; Xpro Battery - BH CORE Manuel

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
USER MANUAL

5.3 Suitable Charging Environments

For safe and efficient charging, use the battery charger in a place that:
A) Is flat and stable (as it is on the bicycle). 
B) Is out of direct sunlight.
C) Is not accessible to children or pets.

5.4 Unsuitable Charging and Discharging Environments and Solutions

The hot and cold environments described below may lead to charging entering stand by or sleep mode without
fully charging the battery.
• Winter discharging stand by mode or DUT (Discharge Under Temperature)
Battery discharging will enter stand by mode if the temperature is below -20 °C, stopping the pedal
assistance system from working and protecting the battery.
In such cases, stand by mode will automatically be disabled when the battery exceeds -20 °C.
• Winter charging stand by mode or CUT (Charge Under Temperature)
Battery charging will enter stand by mode if the temperature is below 0 °C. If charging starts and the
temperature falls below this level due to night cooling or other factors, charging will be stopped and
stand by mode will be activated to protect the battery.
In such cases, stand by mode will automatically be disabled when the battery exceeds 0 °C.
• Noise on televisions/radios/computers
Charging near to televisions, radios or similar devices may cause static, flickering images and other 
interference.
If this happens, recharge somewhere that is away from the television or radio (e.g. in another
room).

5.5 Battery Charging Process

Due to its advanced lithium-ion technology, there is no need to wait for the battery to completely discharge before
connecting it to the charger. Likewise, it is also not necessary to charge it to 100% before using it again. But bear
in mind that, in order to achieve a maximum operating range, a full charge is recommended.
Turn off the pedal assistance system before removing the battery from
the bicycle.
WARNING
STANDBY
CHARGING
CHARGING PROBLEM
100% CHARGED
58
M A N U A L D E L U S U A R I O
D) Is free from rain and moisture.
E) Is well ventilated and dry.
F) Has a temperature of between 15–25 °C.
External port
Charger
Battery port
External port
Charger
Battery port
External port
Charger
Battery port
External port
Charger
Battery port
CORE
CORE
ES
WARNING
ATTENTION
NOTE

6.6 XPro Battery

6.6.1 Introduction
The Xpro additional battery or extender
allows you to extend the bike's range. It is
an external 180 Wh battery in the shape
of  a  bottle  which  fits  a  specific  bottle 
holder that has to be properly installed
and connected to the system by an
authorised store.
When the bottle holder has been installed,
the external battery is connected to the
system by simply inserting it into the bottle
holder.
In other words, this is a Plug&Ride battery that requires no additional connection or work to operate.
There is a button at the top of the bottle that allows the user to see its charge level
75 - 100%
10 - 24,9%
12
USER MANUAL
• Never charge or use a damaged battery.
• Be careful not to touch the charger during the charging process. It may be
hot, especially in high ambient temperatures.
• If a fault occurs while the battery is being charged, remove the charger's
power plug from the socket and wait for the battery to cool down.
• Never touch the power plug, charging plug or contacts with wet hands.
• Make sure that there is no foreign matter on the battery's contacts before
placing it on the bicycle.
• Do not connect the charger's power plug to the battery or bicycle's char-
ging port if it is wet or damp. Make sure that you only connect the power
plug when the battery or bicycle's charging port is completely dry.
• Do not apply excessive force on the power plug or pull the cable with the
power plug connected to the battery.
• Stopping the battery charging process does not damage the battery.
• The battery achieves its maximum service life in ambient conditions of
15-25 °C.
50 - 74,9%
0 - 9,9%
PARPADEA
EN
25 - 49,9%
59

Publicité

Table des Matières
loading

Table des Matières