Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
NUMBERING IN FIGURES
1.
Alignment reference line
2. Socket
3.
Knee centre reference
4. Front link
5.
Balance unit
6. Pivot axis (alignment axis)
7.
Housing
8. Back link
9. Bottom link
10. Chassis
11. Bumper
12. Shim
13. Bumper cover
14. Extension promoter
15. Set screw
16. Friction adjustment - Minimum resistance
17. Friction adjustment - Maximum resistance ¼ turn
18. Spring cup
19. Spring
20. Ferrule
21. Cable
22. Retaining Ring
23. Spring cup seat
24. Knee cap – small
25. Knee cap – large
26. Shin ferrule
27. Bearings (lubrication points)
28. Release points
FUNCTIONS AND BENEFITS
•
Increased knee stability
•
Increased toe clearance in swing phase
•
Lightweight design – slim profile for enhanced cosmetic finish
•
160° knee flexion – suitable for sitting, kneeling, cycling and other
activities where greater knee flexion is desired
•
24-month warranty
INDICATIONS FOR USE
•
Adult amputee up to 100kg (220lbs) patient weight
•
The Total Knee
•
Suitable for a single speed limited community ambulator
CLEARANCE (Figure A)
ALIGNMENT AND ADJUSTMENT (Figure B)
ADAPTER OPTIONS (Figure C)
•
Prong adapter (A-114040 or A-114030) for knee disarticulation or
long transfemoral residual limbs.
•
Female pyramid (2026) for medium to short transfemoral residual
limbs.
•
Euro 4-Hole (2055) for medium/short transfemoral residual limbs,
in combination with 4-Hole Socket Adapter (A-122100 or A-125100).
•
Male pyramid (2025 or 2025T) for medium/short transfemoral
residual limbs or hip disarticulation.
Important: Always use original Total Knee/Össur adapters. Fully engage
threads. Align pinch bolt 90° anteriorly for male pyramid, prong adapters
and Euro 4-hole adapter, but 45° for female pyramid (Figure C). Threads
9
is exclusively used for lower limb prosthetic fittings
®
Publicité
