Main Operating Screen - Allmand LSC 2.1 Display Module Manuel D'instructions

MAIN OPERATING SCREEN

13
12
11
1 – Fuel Level Gauge
2 – Current Date and Time
3 – Accumulative Engine Run Hours
4 – High Coolant Temperature Warning
5 – Menu Button
6 – Start Button
7 – Glow Plug–On Symbol
The orange bar that runs across the top of the Main
Operating screen displays:
• Any applicable fault messages (item 13 in
Figure 1)
• The current date and time (item 2 in Figure 1).
For a list of possible fault messages, see FAULT
MESSAGES.
To change the date and time, see Clock Setup
Screen.
LSC 2.1 Display Module
10 9
1
8 7 6
Figure 1
8 – Time of Next Event
9 – Time-Start Button
10 – Auto-Start Button
11 – Low Oil Pressure Warning
12 – DC Battery Voltage
13 – Fault Message
The middle of the Main Operating screen displays:
• Low oil pressure warning (item 11 in Figure 1)
• Fuel level gauge (item 1 in Figure 1)
• High coolant temperature warning (item 4 in
Figure 1)
• Battery DC voltage (item 12 in Figure 1)
• Accumulated engine run hours (item 3 in Figure 1)
• The time at which the next start-up or shutdown
will occur (Item 8 in Figure 1)
1
2
3
4
5
en