Clock Setup Screen - Allmand LSC 2.1 Display Module Manuel D'instructions

Clock Setup Screen

How to navigate to the Clock Setup screen:
1. On the Main Operating screen, press the Menu
button. The Menu screen will appear.
2. Press the DOWN arrow once to highlight System.
3. Press the Enter button. The System screen will
appear.
4. Press the DOWN arrow once to highlight Clock
Setup.
5. Press the Enter button. The Clock Setup screen
will appear (see Figure 14).
To change the month, day, year, hour, minute, AM/PM,
and time zone:
1. Use the UP/DOWN and LEFT/RIGHT arrows to
move between the fields on the screen.
2. Press the Adjust button to select a field. The
selection will begin flashing green.
3. Use the UP and DOWN arrows to change the
value.
4. Press the Save button.
5. Repeat until all fields are correct.
See UTC TIME ZONES for a list of time zones.
LSC 2.1 Display Module
Figure 14
Note: Make sure the time zone and the GPS
coordinates match up.
When the Day Light Savings Time Setup is
highlighted and the Adjust button is pressed, the Day
Light Savings Time Setup screen will appear (see Day
Light Savings Time Setup Screen).
15
en