Copy Day Events Screen - Allmand LSC 2.1 Display Module Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Copy Day Events Screen

How to navigate to the Copy Day Events screen:
1. On the Main Operating screen, press the Menu
button. The Menu screen will appear.
2. Press the Enter button. The Automatic Control
Setup screen will appear.
3. Press the Enter button. The Timed Events Menu
screen will appear.
4. Press the Copy Day button. The Copy Day Events
screen will appear (see Figure 8).
The Copy Day feature can be used to quickly copy
event settings from one day to other days.
Copying day events is a two-part process:
1. Select the day to copy from.
a. Use the UP and DOWN arrows to select the
day to copy from.
b. Press the Enter button. The day is now copied.
2. Select the day(s) to copy to.
a. Use the UP and DOWN arrows to select the
day(s) to copy the events to.
LSC 2.1 Display Module
Figure 8
In Figure 8, the settings for Sunday will be copied to
the other six days.
9
b. Press the Enter button. A check mark will
appear next to the selected day.
c. Press the Enter button again to remove a check
mark.
d. Repeat steps (a) and (b) to select more days.
e. Press the Apply button. The copy day process
is now complete. The display will return to the
Timed Events Menu screen.
en

Publicité

Table des Matières
loading

Produits Connexes pour Allmand LSC 2.1 Display Module

Table des Matières