Allmand LSC 2.1 Display Module Manuel D'instructions page 6

The bottom of the Main Operating screen has the
glow plug–on symbol (item 7 in Figure 1) as well as
four buttons.
• Auto-Start button (item 10 in Figure 1): Press the
Auto-Start button to activate the auto-start/stop
program, which will start the engine at or near
sunset and stop the engine at or near sunrise.
Press the Auto-Start button again to turn off the
program. For more information on setting up
the sunrise and sunset times, see Auto-Mode –
Sunset/Sunrise-based Start/Stop Screen.
• Time-Start button (item 9 in Figure 1): Press
the Time-Start button to activate the time-start/
stop program, which will start or stop the engine
at preset times of the day. Press the Time-Start
button again to turn off the program. For more
information on setting up the timed start/stop
program, see Automatic Control Setup Screen.
• Start button (item 6 in Figure 1): Press the Start
button to start the engine. The engine will start
after a 15-second delay, and the display will
change from Start to Stop. Press the Stop button
to stop the engine.
• Menu button (item 5 in Figure 1): Press the Menu
button to make programming changes (see Menu
Screen).
2