Automatic Control Setup Screen - Allmand LSC 2.1 Display Module Manuel D'instructions

Automatic Control Setup Screen

How to navigate to the Automatic Control Setup
screen:
1. On the Main Operating screen, press the Menu
button. The Menu screen will appear.
2. Press the Enter button. The Automatic Control
Setup screen will appear (see Figure 5).
There are four items to choose from on the Automatic
Control Setup screen:
• Timed Event Setup (see Timed Events Menu
Screen)
• Block Heater Setup (see Block Heater Setup
Screen)
• Sun-Set Control Setup (see Auto-Mode – Sunset/
Sunrise-based Start/Stop Screen)
• GPS Location Setup (see GPS Location Setup
Screen)
Figure 5
6