Fault Messages - Allmand LSC 2.1 Display Module Manuel D'instructions

LSC 2.1 Display Module

FAULT MESSAGES

Fault: Shutdown for Low Fuel
Fault: Shutdown for High Coolant Temperature
Fault: Shutdown for Low Oil Pressure
Fault: Locked out for Engine Failed Start – The engine will attempt to start 3 times and then lock out to prevent
running the battery dead from start attempts.
Fault: Locked out for LSC Sun Rise/Set Calculation Error – If the GPS coordinates are entered incorrectly, it is
not possible to calculate the appropriate engine start and stop times.
Fault: SLS module Communication Loss – This would indicate an issue with the CAN wiring/communication
between the LSC module and the SLS module.
Fault: Shutdown for AC Frequency Low
Fault: Shutdown for AC Frequency High
Fault: Shutdown for AC Voltage Low
Fault: Shutdown for AC Voltage High
Fault: Failed to Achieve running AC Frequency
29
en