Timed Events Screen - Allmand LSC 2.1 Display Module Manuel D'instructions

Timed Events Screen

How to navigate to the Timed Events screen:
1. On the Main Operating screen, press the Menu
button. The Menu screen will appear.
2. Press the Enter button. The Automatic Control
Setup screen will appear.
3. Press the Enter button.
4. Use the UP and DOWN arrows to highlight the
desired day, and press the Enter button. The
Timed Events screen for that day will appear (see
Figure 7).
To change the hour and minutes for On Time and Run
Duration:
1. Press the Adjust button. The selection will begin
flashing green.
2. Use the UP and DOWN arrows to change the
hour.
3. Use the LEFT and RIGHT arrows to change the
minutes (10-minute increments).
4. Press the Save button.
Figure 7
To change between AM and PM:
1. Press the Adjust button. The selection will begin
flashing green.
2. Use the UP (AM) and DOWN (PM) arrows to
change the selection.
3. Press the Save button.
To change between Enabled and Disabled:
1. Press the Adjust button. The selection will begin
flashing green.
2. Use the UP (Enabled) and DOWN (Disabled)
arrows to change the selection.
3. Press the Save button.
8