Allmand LSC 2.1 Display Module Manuel D'instructions page 21

To change the Start Date (Month/Day) and End Date
(Month/Day):
1. Press the UP and DOWN arrows to move
between Start Date and End Date.
2. Press the Adjust button to select a field. The
selection will begin flashing green.
3. Press the UP/DOWN arrows to change the month
and the LEFT/RIGHT arrows to change the day.
4. Press the Save button.
5. Repeat until both dates are correct.
LSC 2.1 Display Module
To change the Day Light Savings Time: Enabled/
Disabled option:
1. Press the UP and DOWN arrows until Day Light
2. Press the Adjust button to select the field. The
3. Use the UP arrow to change to Enabled and the
4. Press the Save button.
17
Savings Time is highlighted.
selection will begin flashing green.
DOWN arrow to change to Disabled.
en