Troubleshooting; Cleaning; Disposal - HOLZMANN MASCHINEN MKS 180 Mode D'emploi

14.2 Cleaning

The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the machine!
Therfore: When cleaning water and mild detergent if necessary use.
Bare surfaces of the machine against corrosion impregnate (with anti-rust WD40 )

14.3 Disposal

Do not dispose of the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old
15

TROUBLESHOOTING

Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Machine does not start
Blade does not come up to
speed
Machine vibrates strongly
HOLZMANN MASCHINEN GmbH
N O T E
Possible cause
Machine is not connected
Blown fuse or contactor
cable loose
cable is damaged
Extension cord too long
Engine is not suitable for
existing power
weak power grid
Standing on uneven ground
Motor mount is loose
unbalanced blade
www.holzmann-maschinen.at
TROUBLESHOOTING
Solution
Check all electric connections
Change fuse, activate the
contactor
Check cable
replace cable
Exchange on optional
extension cable
see the wiring box cover for
correct wiring
Contact the electrician
New Setup
Tighten the fixing screws
Check cause - fix.
22
MKS180