Safety; Intended Use; Prohibited Use; General Safety - HOLZMANN MASCHINEN MKS 180 Mode D'emploi

11

SAFETY

11.1 Intended use

The machine only in technically perfect condition in accordance with, safety and danger, use it!
Interference, which could affect safety, must be rectified immediately!
It is generally prohibited to modify safety equipment of the machine or to make ineffective!
The metal cut-off saw MKS 180 is designed exclusively for cutting tubes, flat and round materials of
steel, aluminum and non-ferrous metals.
For a different or additional use and resulting damage or injury takes HOLZMANN
MASCHINEN no responsibility or warranty.

11.1.1 Working conditons

The machine is designed for the work under the following conditions:
humidity
temperature
The machine is not intended for outdoor use.
The machine is not intended for use in potentially hazardous conditions.

11.2 Prohibited use

 The operation of the machine under conditions outside of the limits, given in these
instructions is not permitted.
 The operation of the machine without the safety devices provided is inadmissible
 The removal or turning off the protection devices is prohibited
 It is not permitted processing of materials with dimensions outside the limits specified in this
manual.
 It is not permitted the use of tools that are not for use with MKS 180 are suitable.
 The operation of the machine on a way or for any purpose that does not comply with the
instructions of this manual to 100%, is prohibited.
 Do not leave the machine unattended, especially when children are not around. DO NOT
LEAVE the workplace!
For a different or additional use and resulting damage or injury takes HOLZMANN-
MASCHINEN no responsibility or warranty.

11.3 General Safety

Warning labels and / or stickers on the machine that are illegible or removed shall be replaced
immediately!
To avoid malfunctions, damage and physical injury MUST be observed:
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
max. 70%
+5°С to +40°С
+41°F to +104°F
SAFETY
17
MKS180