Sicce Syncra SDC Mode D'emploi page 30

CHECK LIST BEFORE USING APP
EN
• Check the distance between the device and the wireless router (Wi-Fi network). A long distance may weaken the signal
strength and take a long time to record the device, in worst scenario the installation may fail.
IT
• To check the WI-FI connection, make sure that the WI-FI icon is on.
• The device only supports 2.4 GHz Wi-Fi networks. To check the frequency of your network, you need to contact your
internet service provider or refer to your wireless router manual.
DE
• SICCE Srl is not responsible for any problems relating to the network connection or for failures, malfunctions or errors
caused by the network connection.
SICCE Srl is not responsible for any problems relating to the network connection or for failures, malfunctions or errors
FR
caused by the network connection.
• In case connecting the device to the Wi-Fi network does not succeed, it is possible that the device is too far from the
router. Buy a repeater (range extender) to increase the intensity of the Wi-Fi signal.
ES
• The Wi-Fi connection may not occur or be interrupted due to the environment of the home network.
• The network connection may not work properly depending on the Internet service provider.
• The surrounding wireless environment may slow down the wireless network service.
NL
• The device cannot be registered due to problems with wireless signal transmission. Disconnect the device and wait for
about a minute before trying again.
• If the firewall on the wireless router is active, disable it or add an exception.
PT
• The name of the wireless network (SSID) should be a combination of English letters and numbers. (do not use special
characters).
• The smartphone user interface (IU) may vary depending on the operating system (OS), the manufacturer or following
RU
updates to the APP CONTRALL or the operating system itself.
• If the router security protocol is set to WEP, it may not be possible to set up the network. Change the protocol (WPA2 is
the recommended one) and register again the product.
CN
Periodic updates of the APP are recommended in order to take advantage of any improvements to the service and the
application itself.
INITIAL SCREEN
MY DEVICES: these are the single devices registered and manageable individually.
MY SMART SYSTEMS: it is possible to group together a series of individual devices, for example 2 XSTREAM SDC
pumps, a SYNCRA SDC pump and a pump for skimmer PSK SDC and create a system to which to assign a distinctive
name. In case you want to manage multiple aquariums, this function allows you to control them more immediately and
efficiently. It will be possible to switch off and switch on all devices by pressing a single button and schedule FEED TIME.
NOTIFICATIONS: in this session the received notifications will be automatically recorded.
PROFILE: within this session it is recommended to activate the NOTIFICATIONS, to adapt the units of measurement to the
country system, to give consent to the newsletter to receive updates and communications, to select the desired language.
VOICE COMMANDS
Voice commands can be activated via Siri - Google assistant - Alexa
- POWER ON
- SHUTDOWN
- TEMPERATURE CONTROL
- READING OF THE ALERT IN CASE IT IS ACTIVATED
- PRESET CHANGE OF FLOW AND PUMP POWER - (REDUCE 10% / INCREASE 10%)
COMPATIBLE WITH:
- Apple Watch (iOS)
- Smartwatch (Android)
30
APP INFOS