Würth 0510 955 606 Mode D'emploi page 65

CHARGING
CABLE menu
1.
2.
3.
4.
5.
Factory setting
Reset device to factory setting:
1.
2.
3.
Open the CHARGING CABLE menu
If necessary, change measure (metric/imperial) by pressing the info button:
Set the length of the charger cable. Setting range: 1 to 25 m (3 ft. 3 in. to 82 ft.)
- Press Start/Stop button
- Display flashes. Set the length of the charger cable
- Press Start/Stop button to confirm setting
Set the cross-section of the charger cable.
Setting range: 4 - 6 - 10 - 16 - 25 - 35 - 50 mm
- Press Start/Stop button
- Display flashes. Set the cross-section of the charger cable
- Press Start/Stop button to confirm setting
Press Start/Stop button to exit
„Device resetted" appears for 1 second
Device has been reset to factory setting. The submenu is exited automatically.
(AWG 10 to AWG 1)
2
25