Publicité
Les langues disponibles
Les langues disponibles
USER U/I menu,
standard char-
ging settings
(continued)
USER U/I menu,
user charging
settings
Set conservation charging voltage (setting range: Off / 12.0 - 15.5 V)
-
Press Start/Stop button
-
Display flashes. Adjust conservation charging voltage in 0.1 V steps
-
Press Start/Stop button to confirm setting
IMPORTANT! the conservation charging voltage is only available in Charge mode.
Conservation charging does not take place if conservation charging is set to OFF.
However, if the battery voltage drops below 12 V, charging starts.
Set safety cut-out (setting range: 2 h - 30 h)
-
Press Start/Stop button
-
Display flashes. Adjust time in 10 min intervals
-
Press Start/Stop button to confirm setting
IMPORTANT! if charging does not end automatically after the set time has elapsed,
the charger will be switched off as a safety precaution.
Set maximum charging current (Setting range: see Technical Data)
-
Press Start/Stop button
-
Display flashes. Adjust max. charging current in 0.5 A steps
-
Press Start/Stop button to confirm setting
Set main charging voltage (setting range: 12.0 - 15.5 V)
-
Press Start/Stop button
-
Display flashes. Adjust main charging voltage in 0.1 V steps
-
Press Start/Stop button to confirm setting
21
Publicité
