To Clean The Product; Storage; Storage Of The Product And The Battery; Disposal - Meec tools 012595 Instructions D'utilisation

4.3 To clean the product

Caution! Do not use strong detergents or solvents.
This can cause damage to the plastic parts of the product.
Caution! Do not clean with water or other liquids.
● Clean the casing with a soft brush or dry cloth. If the dirt
is not easy to remove, use a moist cloth and a mild
detergent.
● Clean the ventilation openings with compressed air or a
vacuum cleaner.
● Let the product become fully dry before operation.
5

Storage

5.1 Storage of the product and the
battery
● Keep the product in a safe, dry location where children
cannot get access.
● Before storage, charge the battery to 30–50%.
● Keep the battery in a dry location with an ambient
temperature of no more than 27 degrees.
● Charge the battery each 7 months during long-term
storage.
6

Disposal

6.1 To discard the product

● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
32
7

Technical data

Technical data
Rated voltage
Speed
Stroke rate
Blade capacity
Sawing depth 90⁰
Sawing depth 45⁰
Sawing depth 45⁰90⁰
Dust extraction connection
Sound pressure level, LPA
Sound power level, LwA
Vibration level
Weight
The declared values for vibration and noise, which have
been measured according to a standardized test method,
can be used to compare different tools with each other and
for a preliminary assessment of exposure. The meas-
urement values have been determined in accordance with
EN 62841-2-5:2014.
Warning! The actual vibration and noise level when
using tools may differ from the specified maximum value,
depending on how the tool is used and the material. It is
therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of
exposure in actual operating conditions (taking into account
all stages of the work cycle, e.g. the time when the tool is
switched off and when it is idling, in addition to the start-up
time).
18 VDC
3650 rpm
0 – 5000 spm
165 x 16 mm
38 mm
26 mm
26/38 mm
Yes
84 dB(A), K=3 dB
95 dB(A), K=3 dB
does not exceed 2.5
m/s
2
2.9 kg
2022_001