Unpacking - Haussmann Xpert MJ10250IIIA Guide De L'utilisateur

!
A
B
C
D
L
K
I
J
N
Q
R
U
T
S
fig.2 -

Unpacking

UNPACKING
Refer to Figure 2.
• Open shipping box. Remove all parts, except saw body, from both styrofoam
packing bases and set parts and top base safely aside.
• Use utility knife to cut down the four corners of the shipping box, fully exposing
the bottom packing base.
• Cut away enough styrofoam from motor cover side of packing base so that, with
the aid of an assistant, you can slide the saw body from the base.
CAUTION: Do not attempt assembly if parts are missing. Use this manual to
order replacement parts.
If any parts are missing or damaged, please contact Customer service at
1-866-206-0888.
The table saw body comes assembled as one unit. Additional parts which need to
E
be fastened to the saw should be located before assembling:
F
A. Table Extension (2)
H
G
B. Dust Chute
C. Front Rail (2)
M
D. Rear Rail (2)
E. Mitre Gauge Assembly
O
F. Blade Guard Assembly
G. Dado Insert
H. Table Insert
P
I. Handwheel Assembly with Knob (2)
J. Rip Fence Assembly
K. Rubber Foot (4)
L. Anti-kickback Pawl Assembly
M. Line Cord Hooks (2)
N. Brace
O. Rip Fence Storage Hooks (2)
P. Blade Guard Storage Hooks (2)
Q. Push Stick Storage Hooks (2)
R. Push Stick
S. Base Panel (4)
T. Corner Support (4)
U. Caster Set (2)
Hardware Bag #1
M10 x 25 Socket Head Bolt (6)
M10 Lock Washer (6)
M10 Flat Washer (6)
Hardware Bag #2
M8 x 28 Hex Head Bolt (8)
M8 x 25 Hex Head Bolt (8)
M8 x 20 Hex Head Bolt (4)
M8 Lock Washer (20)
M8 Flat Washer (20)
M8 Hex Nut (16)
M8 Acorn Hex Nut (4)
Hardware Bag #3
M6 x 16 Hex Head Screw (2)
M6 Flat Washer (2)
M6 Hex Nut (2)
M6 Lock Washer (2)
Hardware Bag #4
M10 x 25 Socket Head Bolt (4)
M8 x 16 Socket Pan Head Screw (8)
M6 x 12 Socket Pan Head Screw (24)
M6 x 16 Socket Head Bolt (2)
M5 x 12 Socket Head Bolt (4)
M3 x 10 Pan Head Screw (4)
M10 Lock Washer (4)
M6 Hex Nut (2)
M5 Lock Washer (4)
M3 Lock Washer (4)
M10 Flat Washer (4)
M6 Flat Washer (2)
M5 Flat Washer (4)
M3 Flat Washer (4)
Hardware Bag #5
10/13 mm Open End Wrench
4 mm Hex Wrench
5 mm Hex Wrench
8 mm Hex Wrench
57