Unpacking; Technical Specifications - Haussmann Xpert MJ10250IXC Guide D'utilisation

UNPACKING

Refer to Figure A.
1. Carefully remove the table saw from the carton.
2. Separate the parts.
3. Lay out the parts, and check them against the parts listed below. Examine the
parts carefully.
fig.A
Table saw assembly
Mitre gauge
WARNING: If any part is missing or damaged, do not plug in the table saw until
you have replaced the missing or damaged parts.
To avoid injury, the styrofoam block should be removed between the motor and
the table.
If any parts are missing or damaged, please contact Customer service at
1-866-206-0888.

TECHNICAL SPECIFICATIONS

Code
Model
Capacity with 10" Blade:
Depth of cut at 90°
Maximum tilt angle of arbor (left)
Depth of cut at 45°
Max. cut right of blade with rip fence
Saw Dimensions:
Cabinet depth
Cabinet width
Cabinet length
Main table
Right extension table
Saw blade:
Blade max. capacity
Blade arbor
Dado blade max. capacity
38
Push stick
Dust extraction nozzle
Rip fence
Screw M4 Blade wrench
97925008
MJ10250IXC
3-1/8" (8 cm)
45°
2-5/32" (5.5 cm)
24-1/2" (62.2 cm)
11" (27.9 cm)
17-5/16" (44 cm)
23-13/16" (60.5 cm)
24" x 21-1/16" (61 x 53.5 cm)
5-63/64" x 21-1/16" (15.2 x 53.5 cm)
10" (25.4 cm)
5/8" (1.59 cm)
1/2" (1.3 cm)
Blade guard Kickback pawls
!