Haussmann Xpert MJ10250IIIA Guide De L'utilisateur page 60

Kick Plate Cam
Bracket
fig.7
fig.8
fig.9 -
Kick Plate Cams Inside the Brackets
fig.10
fig.11
ASSEMBLY
ASSEMBLE CASTER SETS
Refer to Figures 7-11.
Tools Required: Two 1/2" Open End Wrenches
• Refer to Figure 7; remove casters (4) and supports (2) from carton.
Foot Pedal Bar
• Loosen and remove the bolt and hex nut from the bracket (see Figure 8)
• Rotate foot pedal bar so that kick plate cam is inside bracket (see Figure 9).
• The kick plate cam must be underneath the caster to function properly
(see Figure 10).
• Refer to Figures 10 and 11; place caster onto the bracket and secure in position
with bolt and hex nut.
• Repeat above steps for the second caster set.
59