Adjustment Of Stitch Length; Adjustment Of Differential Feed Ratio - ELNA eXtend easycover Manuel D'instructions

w
w
r
q
w
e
r
w
q
e

Adjustment of Stitch Length

To adjust the stitch length, turn the dial.
The larger the number, the longer the stitch.
For regular sewing, set the stitch length at 3 – 3.5.
q Stitch length dial
w Setting mark
e To lengthen
r To shorten

Adjustment of Differential Feed Ratio

The differential feed ratio can be altered by turning the
dial.
The number on the dial indicates the ratio between the
main and the sub feed motion.
• Set the dial at 1.0 for regular sewing.
• Set the dial at a lower number when sewing fine fabrics
that tend to pucker.
• Set the dial at a higher number when sewing stretch
fabrics such as knits, jersey and tricot.
q Differential feed dial
w Setting mark
e To shrink
r Changing Needle
12