Ensure that the solar panel 1 is not installed where there are
strong temperature fluctuations, e.g. due to heating devices.
Ensure that the solar panel 1 is installed far away from
unnatural light sources and in southern direction.
Ensure that the connection cable 17 of the solar panel 1 can
reach the spotlight 3 . Max. distance between the solar panel
1 and the spotlight 3 is approx. 2.5 m (HG04465B only).
For HG04465A:
Carefully fold the solar panel 1 upwards.
Remove the mounting plate 6 from the spotlight 3 by loosening
the screws of the ball joint cover 7 (Fig. B).
Use the slotted holes of the mounting plate 6 intended for the
screws 8 to mark the drill holes.
Now drill the fixing holes (Ø 8 mm, depth approx. 40 mm).
Before drilling the fixing holes, ensure there are no gas, water or
electrical lines that could be drilled into or damaged in the area
where you will be drilling.
Insert the dowels 5 into the drill holes (Fig. B).
Attach the mounting plate 6 using the screws 8 provided
(Fig. B).
Ensure that the solar panel 1 is orientated towards the sun.
GB/IE/NI
15