Requirements For The Set-Up Location; Connecting The Power Supply; Aerial - SilverCrest SRH 5 B2 Mode D'emploi Et Consignes De Sécurité

NOTE
► Check the package for completeness and signs of visible damage .
► If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the Service hotline (see section
Service) .

Requirements for the set-up location

For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
■ Place the device on a firm, flat and level surface .
■ Position the device so that the speaker
are not covered .
■ Do not operate the device in a hot or very wet environment or in the vicinity
of combustible materials .
■ The power socket must be easily accessible so that the plug of the mains
adapter can be easily disconnected in an emergency .

Connecting the power supply

CAUTION
► Before connecting the device, compare the connection data on the name-
plate of the power supply unit (voltage and frequency) with those of your
mains supply . These data must match to prevent damage to the device .
♦ Connect the supplied mains adapter to the mains adapter connection
and to a mains socket . The device is now in standby mode .

Aerial

♦ Pull out the telescopic aerial
SRH 5 B2
and the bass reflex opening
9
completely for DAB+ and FM reception .
0
q
r
GB │ IE 45 ■
│