Volkswagen 2K0 017 221 Instructions De Montage page 7

- Connect plastic caps -10- to the open tube ends -A- of the
separating grid -1-.
- Fold rear seat bench forwards.
- Place the separating grid -1- in the vehicle interior with a
second person.
- Align the plastic caps -10- on the C-pillar -B-.
- Place the threaded bracket -6- on the left and right side
between the C-pillar -B- and the seat belt locking -A-.
- Fit the star grip nuts M8 (open) -7- to the threaded brackets -
6-.
- Screw the star grip nuts M8 (open) -7- on the threaded
bracket -6- until the plastic caps -10- are laying on the C-
pillar -B- without a play.
Warning:
Observe that the seat belt does not jam with the threaded bracket -
6-.
- Fold the left and right retaining eyes -A- upwards.
- Place the anchor plates -9- on the retaining eyes -A-.
- Secure the anchor plates -9- with the coach bolts (M8 x 45) -8-
and the star grip nuts M8 (closed) -2- to the separating grip -1-.
Distributed by Votex GmbH Printed in Germany by Votex GmbH
7
1
2
10
A
1
B
10
6
6
2 A
9 8
1
A