After Each Inflation; Annually; Cleaning And Storing - Mustang Survival MINIMALIST BELT PACK Manuel De L'utilisateur

AFTER EACH INFLATION

Deflate and re-arm, as described in "Re-arming," page 10.

ANNUALLY

Perform the following at the beginning of each boating season, after
inflation, or whenever the integrity of the flotation device is in doubt:
1. Check all components for dirt or corrosion (see "Inspecting
Components," page 4). Clean or replace, as necessary.
2. Visually examine your flotation device for damage or excessive
abrasion, wear, tear, or contamination. Particular attention must
be paid to the stitching, straps, and hardware. If in doubt, contact
Mustang Survival customer service for evaluation and/or servicing.
3. Perform the Leak Test (see "Care and Maintenance/Every Six
Months," page 17).
4. Deflate as outlined in "Deflating," page 9.
5. Ensure green indicator pin is installed in the manual inflator.
6. Record the date, noting "annual" in permanent ink on the Care
and Storage label, located on the bladder.

CLEANING AND STORING

To clean your flotation device:
• Hand wash flotation device or sponge it down in warm, soapy
water
• Rinse with clean water
• Hang to dry on a plastic coat hanger
• Store the dry flotation device in a warm, dry, and well-ventilated
place out of direct sunlight
DO NOT DRY-CLEAN, USE CHLORINE BLEACH, OR APPLY DIRECT HEAT.
18