Lubricating The Gearbox - Stihl FS 94 R Notice D'emploi

Checking the Spark Plug
Clean dirty spark plug.
N
Check electrode gap (A) and
N
readjust if necessary – see
"Specifications".
Rectify the problems which have
N
caused fouling of the spark plug.
Possible causes are:
Too much oil in fuel mix.
–
Dirty air filter.
–
Unfavorable running conditions.
–
WARNING
Arcing may occur if the adapter nut (1) is
loose or missing. Working in an easily
combustible or explosive atmosphere
may cause a fire or an explosion. This
can result result in serious injuries or
damage to property.
FS 94 R
Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the Spark Plug
Fit the spark plug and tighten it
N
down firmly.
Press the boot firmly onto the spark
N
plug.
A
2
Fit the cap (1), insert the screw (2)
N
and tighten it down firmly.
1

Lubricating the Gearbox

1
Check grease level after every 25 hours
of operation and re-lubricate if
necessary.
Remove the screw plug (1).
N
If no grease can be seen on the
N
inside of the screw plug (1): Screw
the tube (2) of STIHL gear lubricant
(special accessory) into the filler
hole.
Squeeze no more than 5 g (1/5 oz)
N
grease into the gearbox.
Do not completely fill the gearbox with
grease.
Unscrew the tube (2).
N
Insert the screw plug (1) and tighten
N
it down firmly.
1
NOTICE
English
27