Beta 1438DCT/S Mode D'emploi page 10

- Unlock clutch 1 as follows:
1) Keep tool 2 pressed and rotate it clockwise until it locks (fig. 7, red circle).
2) Turn the nut clockwise by using a wrench, until the three catches of clutch 1 can be locked by hand
(fig. 7.1, red circle).
Caution: Before pressing the clutch, check that tool 1 is rotated until it locks; this will
prevent the clutch from getting damaged beyond repair.
- Remove tools 2 and 5.
LOCKING CLUTCH 2
- Fit tool 4 onto the clutch (fig. 8).
Caution: Check that tool 4 has been installed correctly (fig. 8.1), to avoid damaging the
clutch beyond repair.
fig. 8
Fig. 7 Fig. 7.1
fig. 8.1