Calibration Mirror Set 1 987 009 A18N; Adapter Kit With Aluminum/Special Rims Per Wheel; 987 009 A11N; Adapter Kit Bmw/Mb 4-Hole 1 987 009 A05N - Nussbaum WA 950 Instructions De Montage

Ensure when setting up the calibration frame that it is not
unbalanced by installing the sensors on one side only
and so tips over.
The sensors could be damaged as a result.
- Once the calibration process is finished, store the calibration
frame in a safe place or in its shipping packing.
4.6

Calibration mirror set 1 987 009 A18N

Scope of supply:
- 4 x calibration mirrors A)
- 1 x spirit level B)
- 4 x measuring cylinders C)
- 2 x holding frames D) are not required!
- 4 x adapters E) are not required!
Fig. 41: Calibration mirror set 1 987 009 A18N
4.7

Adapter kit with aluminum/special rims per wheel

1 987 009 A11N

Fig. 42: Adapter kit aluminum/special rims 1 987 009 A11N
Depending on the shape of the rim, the plastic bolts of the clamps
can be replaced by ones with a more suitable shape.
Fig. 43: Plastic bolts on the clamp
32
4.8

Adapter kit BMW/MB 4-hole 1 987 009 A05N

Scope of supply:
- 4 x adapter disks for 4-hole rims
- 12 x screws M5x10
Installation:
There are two threaded holes at the back of the clamps. Insert an
M5x10 screw into each of them and do them up tight. Put the
adapter in place, with the flat side toward the screws. Turn the
adapter until it comes up against the stop so that it is held by the
screw heads.
Fig. 44: Adapter kit BMW/MB 4-hole 1 987 009 A05N
4.9

Adapter kit Porsche 1 987 009 A06N

Scope of supply:
- 4 x adapter rings large
- 4 x adapter rings small
- 8 x screws M5x10
Installation:
There are two threaded holes at the back of the clamps. Insert an
M5x10 screw into each of them and do them up tight. Put the
adapter in place, with the flat side toward the screws. Turn the
adapter until it comes up against the stop so that it is held by the
screw heads.
Fig. 45: Adapter kit Porsche 1 987 009 A06N
08.12.08 1 689 978 435N