Truck Alignment; Retrofit Kit 1 987 009 A37N For Nts 5Xx; General; Contents Of The Retrofit Kit - Nussbaum WA 950 Instructions De Montage

Further installation or mounting is not necessary; but it is abso-
loutly recommended to modify the setup of the program.
By choosing the official databank via 'Setup and Maintenance' =>
'Setup' => 'databank' => 'vehicle despription' => 'Manufacturer'
the VAG- Process starts automatically, as soon as you align a
vehicle with multilink- axle.
4.15

Truck alignment

First of all you have to install the smartcard 1 987 009 AU0N as
a secondary smartcard. There please apply the upgrade- button
.
1300 9730
Please make sure that you have installed a software version,
which supports the Truck procedure. Requirements are software
2.0 and databank year minimum 2005. In case of retrofitting the
truck function, it is necessary, as the case may be, to run the
databank upgrade 1 987 009 AS5N.
On the other hand it is not necessary to carry out special
modifications in the setup of the program.
The chassis bar and the support for the drawbar tailer, which are
delivered as special accessories in the sets 1 987 009 A60N /
A61N, are normally mounted and dismounted after each align-
ment.
Measuring bar for the truck alignment
1 689 978 435N 08.12.08
5.

Retrofit Kit 1 987 009 A37N for NTS 5xx

5.1

General

The Retrofit Kit may be mounted in already installed monitor
cabinets of the NTS 5xx starting from FD: 01/2001 and up to and
including software version V3.70. Operating system Windows
ME or XP is taken for granted. Hardware prerequisite: one free
USB port plus one free or external COM port.
These mounting instructions are meant for qualified electricians.
We therefore assume the knowledge and observance of the
emergency prevention regulation of your country.
When working at this type of devices.
5.2

Contents of the Retrofit Kit:

Qty Order No.
1 1 987 009 A38N
2 1 987 009 AH1N
1 1 987 009 AM4N
4 1 987 009 AF6N
1 1 987 009 A14N
1 1 987 009 A16N
1 1 987 009 A17N
1 1 987 009 A08N
1 1 987 009 AS4N
1 1 987 009 AS6N
1 1 689 979 873N
1 1 689 978 435N Installation Instructions WA 9xx
1300 0960
Name
electric sheet complete Smart Card
reader with USB and COM cable,
radio receiver box, 4 loading cables,
power supply line
fastening angle
sensor holder
set = 4 pces incl. sensor retaining pin
loading contact
radio sensor
set = 4 pces. incl. cable
brake pedal clamp
steering wheel clamp
clamping device
set = 4 pces.
Smart Card
in Smart Card Reader
CD software
Operation Manual WA 9xx
35