R&G LP0200BK Instructions De Montage page 2

LEGEND
ITEM 1 = OEM SUB-FRAME (FOR ILLUSTRATION ONLY; NOT SUPPLIED IN THE KIT)
ITEM 2 = LICENCE PLATE BRACKET (TB0200BK) (x1)
ITEM 3 = No. PLATE LIGHT (LA0002) (x1)
ITEM 4 = No. PLATE LIGHT SHROUD (x1)
ITEM 5 = M6x 25mm LONG BUTTON HEAD BOLTS (x4)
ITEM 6 = M6 WASHERS (x4)
ITEM 7 = HEAT-SHRINK TUBES (x3)
ITEM 8 = BULLET CONNECTORS (CON0004) (x3 set)
ITEM 9 = CABLE TIES (x3)
ITEM 10 = REFLECTOR (x1)
Please note that in cases where kits are packed with rubber washers holding the components onto
the bolt – the rubber washers should be thrown away!
PICTURE
PICTURE 3
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
TOOLS REQUIRED

Metric socket set.

Allen key set

6mm and 8mm spanner

Small amount of super glue.
1
B
R&G Racing
www.rg-racing.com
2
PICTURE
PICTURE 4
Email: info@rg-racing.com