Publicité
T2
HSS
490991
SZ 14
HM
490992
HSS
490995
SZ 20
HM
490996
HSS
490944
FZ 6
HM
490978
HSS
490946
FZ 10
HM
490980
Ø 3 mm
491065
491066
Ø 5 mm
DS 32
490067
Ø 6 mm
Ø 8 mm
491068
491069
Ø 10 mm
SZO 14 Z
HM
490978
SZO 14 S
HM
491164
SZO 20 Z
HM
490980
SZO 20 S
HM
491765
490770
(
Ø 17 mm)
490771
(
Ø 24 mm)
490772
(
Ø 8,5 mm)
484176
(Ø 13,8 mm)
484176
464164
(Ø 13,8 mm)
490772
(Ø 8,5 mm)
490770
(Ø 17 mm)
484176
(Ø 13,8 mm)
490771
(Ø 24 mm)
Jointing system VS 600
T1
Type of joint
SZ 14 (14 mm)
Dovetail-
joints
SZ 20 (20 mm)
FZ 6 (6 mm)
Slotted box joints
FZ 10 (10 mm)
Ø 6 mm
Dowels holes
Ø 8 mm
DS 32
Ø 10 mm
SZO 14 Z
Open
SZO 14 S (14 mm)
dovetail
SZO 20 Z
tenons
SZO 20 S (20 mm)
1
Technical data
The order numbers for cutters, drill bits, copying rings and
centring mandrels can be found in Table T2.
We recommend that you use the maximum speed of your
router for the specifi ed cutters and drill bits.
2
Correct use
The jointing system VS 600 has been designed to rout
dovetail joints, slotted box joints, dowel holes and
open dovetail tenons in wood and wooden materials in
combination with the corresponding templates, copying
rings and cutters with Festool routers from series OF 900,
OF 1000 and OF 1010.
The user will be liable for damages and accidents due to
incorrect use.
3
Safety instructions
• When working with the jointing system VS 600 please
pay attention to the safety instructions enclosed with
your router too.
• Using only the cutters, copying rings and centring
mandrels listed in Table T2.
• Only use original accessories and spare parts from
Festool.
• Make sure that the workpieces are securely clamped
and that all clamping levers and rotary knobs on the
jointing system are closed before routing.
16
Workpiece
thickness
from - to
(recommended)
15 - 20 mm
(18 mm)
21 - 28 mm
(24 mm)
6 - 10 mm
10 - 20 mm
12 - 14 mm
15 - 22 mm
23 - 28 mm
10 - 14 mm
14 - 25 mm
Publicité
