Technical Data Romax 4000 - Rothenberger ROMAX 4000 Instructions D'utilisation

valid specifications when shipping li-ion battery packs. If necessary, consult your freight for-
warder. Certified packaging is available from ROTHENBERGER.
2

Technical data ROMAX 4000

Battery voltage .....................................................................
Battery capacity. ..................................................................
Rated power consumption ...................................................
Motor speed. ........................................................................
Maximum piston force ..........................................................
Pressing time (according to nominal size) ............................
Dimensions (L x W x H) .......................................................
Weight (without battery) .......................................................
Working range. (system- dependent) ...................................
Application temperature range .............................................
Operating mode ...................................................................
Sound pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear ear protection!
Measurements found in compliance with EN 60745-1.
Vibration total value .............................................................
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
) ...................................................
pA
) ......................................................
WA
ENGLISH
18 V
2,0 Ah / 4,0 Ah
540 W
-1
22000 min
32kN
ca. 5 s
450 x 125 x 79 mm
ca. 2,9 kg
Ø 12 – 108 mm
-10 – 60°C / 14 – 140°F
S3
71 dB (A) ¦ K 3 dB (A)
pA
82 dB (A) ¦ K 3 dB (A)
WA
2
≤ 2,5 m/s ¦ K= 1,5m/s
2
17