The device may only be operated in a well ventilated environment with an adequate air change
frequency.
Switch off the device and separate it from the power supply network when it is not needed..
2
Scope of delivery
1 refrigerant Recovery unit
1 power cable
1 filter
1 filter connection hose
1 OFP cable for DOT bottles (used in special countries)
1 carrying belt
1 manual in various languages
3
Technical Data
Voltage ..............................................................
Output................................................................
Refrigerant classes ............................................
Intake duct ........................................................
Dimensions (LxBxH) ..........................................
Weight ............................................................ about 12 Kg
Refrigerants .......................................................
Extraction rate ...................................................
Noise pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear ear protection!
Measured values determined in accordance with EN 60335.
4
Function of the Unit
4.1
Overview
1
Display
2
On/Off button
3
Menu button
4
Low Pressure display
5
High Pressure display
6
OFP display (in combination with an OFP cable)
4.2
Commissioning
Description of the ROTHENBERGER Recovery unit:
The Recovery unit is used to extract refrigerants from refrigerant cycles.
It is a two-piston compressor device which totally extracts all refrigerant. A low pressure switch
protects against damage to the piston. An overpressure switch prevents overfilling of the refrig-
erant recycling bottle.
12
) .................................
pA
) ...................................
WA
ENGLISH
230 V, 50/60 Hz
0.74 kW
A1, A2L, A2
¼" SAE
370 x 250 x 360 mm
Category III: R12, R134a, R406A, R1234yf...
Category IV: R22, R407C, R502, R509...
Category V: R404A, R407A, R410A, R32
Gaseous 0.5 kg/min (R410A)
Liquid: 3.5 kg/min (R410A)
Push/Pull: 9.5 kg/min (R410A)
≤ 68 dB (A) ¦ K
3 dB (A)
pA
≤ 79 dB (A) ¦ K
3 dB (A)
WA
7
Motor fault indicator
8
Operating button
9
Inlet connection
10
Outlet connection
11
Storage compartment at the rear
(A)