Titan XL255 Mode D'emploi page 20

Cleaning the Quickflo™ Valve
Cleaning or servicing the Quickflo™ valve may be required if the unit has priming problems. Priming problems may be
prevented by properly cleaning the sprayer and following the long-term storage steps.
1. Remove the suction set.
3. Replace Quickflo™ valve assembly by screwing it into
the sprayer.
English
2. Unscrew the Quickflo™ valve assembly (b) from the
sprayer. Visually inspect the inside and outside of the
inlet valve assembly. Clean any paint residue with the
appropriate cleaning solution.
(b)
4. Replace suction set and hand-tighten.
If priming problems persist, you may need to replace the
inlet valve assembly. Call Technical Service (1-866-248-
2698) to order new inlet valve assembly.
20