Travis Industries Cypress GS 2 Manuel Du Propriétaire page 9

Install the inner flue
assembly and exhaust cover
plate. Make sure the
attached gaskets are in
place and form an air-tight
seal.
Install the outer flue
assembly, cover plate, and
gaskets. Make sure the
gaskets are correctly
positioned and form an air-
tight seal.
The flue cover with a cutout may be discarded. Use the
flue cover designed for rear vent applications.
© Travis Industries
Fonctionnement
NOTE: Install the flue
assembly with the diffuser
to the bottom.
9
100-01380-FR