RedMax BHB250P Manuel D'atelier page 15

4. Loosen the screws for the battery connection.
5. Loosen the screws holding the battery cable.
6. Loosen all the cables from their clamps and lift the
control unit, main switch and main cables out of the
chassis.
7. Remove the cover from the keypad.
8. Disassemble the control unit. See
the control unit on page 16
9. Disassemble the main switch. See
the main switch on page 17
568 - 002 - 27.03.2018
5.7.2 To assemble the main cable
Note: Make sure the cables are put correctly to prevent
them from being caught between the chassis halves.
1. Assemble the main switch. See
2. Assemble the control unit. See
3. Attach the cover onto the keypad.
4. Put all cables (in their attachments), control unit,
To disassemble
To disassemble
main switch on page 17
control unit on page 17
main switch and main cables into the chassis.
.
To disassemble the
To assemble the
Repair instructions - 15