Publicité
Les langues disponibles
Les langues disponibles
(1) With a basic understanding of kickback you can reduce or eliminate the element of surprise.
Sudden surprise contributes to accidents.
(2) Keep a good grip on the handle with both hands.
A firm grip will help you reduce kickback and maintain control of the product.
(3) Make certain that the area in which you are cutting is free from obstructions.
Remove any obstruction which could be hit while you are operating the product.
(4) Cut at high engine speeds.
(5) Do not overreach
Keep proper footing and balance at all times.
(6) Follow the manufacturer's sharpening and maintenance instructions for the cutting element.
(7) Only use replacement accessories specified by the manufacturer or the equivalent.
3.3- Symbols
3.3.1- Symbols carved on machine
WARNING - For safe operation and maintenance, symbols are carved in relief on the
machine.
According to these indications, please be careful not to make any mistake.
The port to refuel "MIX GASOLINE"
Position: Fuel cap
The direction to close the choke
Position: Air cleaner cover
The direction to open the choke
Position: Air cleaner cover
3.3.2- Symbols labeled on machine
Read the instructions manual before operating the machine
Wear head, eye and ear protection.
Read, understand and follow all warnings.
Improper handling of the machine can result in accidents causing serious injury or
death. Carefully read this manual and practice using the hedge-trimmer until you are
fully acquainted with all the operations and have learned how to use it correctly.
Never touch hot surface.
Warning! Sharp blades. Injury and cutting hazard.
Keep all parts of your body away from the sharp blades.
Always wear protection gloves for any intervention on the blades.
Keep all persons and animals at minimum 15m away
Never modify the machine.
The guarantee is void if you modify the machine or improperly use the machine.
If warning labels peel off or become dirty and impossible to read, contact your dealer to
order new labels and affix them on the machine, to avoid a danger.
IV. GETTING STARTED
4.1- Unpacking
Remove product from its packaging.
Check that product and accessories are not damage.
Page 22 of 43
Publicité
