Hansgrohe 04125181 Instructions De Montage / Mode D'emploi / Garantie page 8

4
5a
27 mm
6
8
5b
English
To insure correct operation of the
thermostatic mixer, the hot supply
must be connected to the hot
inlet and the cold supply must be
connected to the cold inlet.
Install the spout tee
Remove the plug, spout adapter, and sealing ring
from the spout tee.
The mounting nut and friction washer remain on
the tee.
If the mounting surface is thin, leave the spacer on
the tee as well. Otherwise, it may be discarded.
Wrap the threads on the side port plugs with
plumber's thread tape.
Install the plugs.