Hansgrohe 04125181 Instructions De Montage / Mode D'emploi / Garantie page 14

13
2
14
2
15
14
1
3
1
English
Feed the handshower hose down through the
handshower holder.
Snap the two halves of the insert around the hose.
Rest the end of the handshower hose in the holder.
Connect the hose to the
handshower hose (04124181
only)
Wrap the threads on the high pressure hose with
plumber's thread tape.
Install this end of the hose on the one of the
mixing valve outlets.
Connect the handshower hose to the high
pressure hose.
Connect the spout tee to the
mixing valve*
Wrap the threads on the outlet line (not included)
with plumber's thread tape.
Install the line on the mixing valve outlet.