Hansgrohe 04125181 Instructions De Montage / Mode D'emploi / Garantie page 2

2
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Max. flow rate
Hole size in mounting surface
spout tee
spout adapter pin
valve
handshower holder
Max. depth of mounting surface / valve
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This faucet requires ½" hot and cold supply
lines (not included).
To insure proper fit of the trim, the
surface material (tile, etc) must be
installed prior to installation of
this rough.
• Protection against back siphonage is provided
by a check valve.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for this
product in a safe place. The receipt is required
should it be necessary to request warranty
parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
8 GPM
1⅜"
³⁄₁₆"
2½"
1⅜"
1"