Kessel Aqualift F Basic Instructions D'utilisation page 78

(1) Voltage
(A) Brown
(B) Blue
(C) Green/yellow
(2) Wastewater pump
(D) Green/yellow
(E) Blue
(F) Brown
Connect potential-free contact / remote signal generator
A potential-free contact can be connected at the con-
trol unit, available from Busch-Jäger (item no. 1515
U-12-101).
After connecting the control unit to the mains, press the
alarm button (7) and pump button (9) simultaneously for 5
seconds.
The control unit beeps twice briefly to confirm that the
potential-free contact / remote signal generator can be
connected.
Connect potential-free contact / remote signal generator
to (T) and (U) per circuit diagram.
78 / 144
(3) Wastewater pump (Duo)
(G) Green/yellow
(H) Blue
(J) Brown
(5) Alarm
(T) Connection for external remote sig-
nal generator / potential-free contact
(U) Connection for external remote sig-
nal generator / potential-free contact
Pumping station / Installation and operating manual
(4) Float switch
(K) Yellow
(L) White
(M) Pink
(N) Brown
(O) Grey
(P) Not used
(Q) Green
(R) Not used
(S) Not used
016-102_01 DE_EN_FR