Mettler Toledo SevenCompact S230 Conductivity Mode D'emploi page 8

2 S afety measures
Measures for your protection
Risk of explosion
Risk of corrosion
Measures for your operational safety
Caution
6 Safety measures
●
Never work in an environment subject to explosion hazards! The housing
of the instrument is not gas tight (explosion hazard due to spark for m a-
tion, corrosion caused by the ingress of gases).
●
When using chemicals and solvents, comply with the instructions of the
pro d uc e r and the general lab safety rules!
●
Never unscrew the two halves of the housing!
●
Have the meter serviced only by METTLER TOLEDO Service!
●
Any spillage should be wiped off immediately! Some solvents might
cause corrosion of the housing.
●
Avoid the following environmental influences:
•
Powerful vibrations
•
Direct sunlight
•
Atmospheric humidity greater than 80%
•
Corrosive gas atmosphere
•
Temperatures below 5 °C and above 40 °C
•
Powerful electric or magnetic fields