Introduction - ITW SIMCO ION MPM Notice D'utilisation

1 Introduction

The Balance Control Kit is connected to the MPM with the supplied 12-pin cable. The Balance
Control Kit is used for balancing the ion balance of the neutralising equipment. The residual
charge on the product to be neutralised can be greatly reduced when the ion balance is
balanced correctly, as described in this manual.
Adhesive label
Machine panel Machine connector
Control knob
MPM connector
(FRONT VIEW) (BACK VIEW)
Fig. 1, External Balance Control Kit MPM
GB
ExternalBalanceControlKit_MPM_UM_9752080710_NL_D_GB_F_V2_0 29