Preface; Symbols - ITW SIMCO ION MPM Notice D'utilisation

Preface

This manual is intended for the installation and use of the External Balance Control Kit MPM,
and also referred to as Balance Control Kit. The Balance Control Kit is used in conjunction with
Simco-Ion neutralising equipment and a power unit type MPM, also referred to as MPM.
This manual should always be available for the staff members operating the device. Read
through the entire manual before you install and commission the product. Follow the instructions
set out in this manual to ensure proper operation of the product and to retain your entitlement
under the guarantee. The terms of guarantee are set out in the SIMCO (Nederland) B.V.
General Terms and Conditions of sale.

Symbols

The following symbols may be found in the manual or on the device.
Warning
Refers to specific information meant to prevent injury or considerable
damage to the product or the environment.
Danger
Refers to information meant to prevent electric shocks.
Note
Important information about efficient usage and/or to prevent damage to the
product or the environment.
ExternalBalanceControlKit_MPM_UM_9752080710_NL_D_GB_F_V2_0 28