Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Reclining Child Restraint
This child restraint has 3 positions:
1
2
Rear Facing -
3
For children 2.3-10 kg (5-22 lb),
fully recline the child restraint so that
the bottom level line is parallel with
the ground.
For children 10-18 kg (22-40 lb)
AND are able to sit up unassisted,
rotate the restraint so the recline angle is between the 2 level
lines.
Forward Facing -
1
Upright or
Booster Seat -
1
Upright
NOTE:
When forward facing, the semi-reclined position is to
be used only to install the child restraint and booster seat
flush against the vehicle seat back. Vehicle seat back must be
upright.
How to Change Positions
To recline, pull out on recline handle
and push top of child restraint back.
For upright or semi-recline
position, pull out on recline handle
and pull top of child restraint forward.
9
3
2
Semi-reclined
Removing Harness System
Only remove the harness system to clean the seat pad or
to convert into a booster seat. To remove accessories, see
page 19.
1.
Fully Loosen Harness
Strap
Push down on harness release lever
(under flap on front of seat pad)
while pulling out on harness strap as
shown.
2.
From Back, Remove
Harness Strap Loops
From Splitter Plate
3.
Pull Harness Strap Out
of Shoulder Harness
Guides
continued on next page
10
Publicité
Chapitres
Table des Matières
