Safety 1st Alpha Omega 65 Manuel De L'utilisateur page 25

6. Hook UAS to Vehicle
Anchor
7. Tighten Belt
Place knee in child restraint.
Firmly push down while pulling
free end of belt to tighten.
It may be easier to pull pad away
from shell and tighten the belt
through the belt path opening as
shown.
8. Tighten Tether
With knee still in child restraint,
push firmly on the back of the seat
and tighten tether strap.
43
9. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than 2.5
cm (1 in.).
If it moves more than 2.5 cm (1 in.),
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
To Release UAS
Remove child from child restraint.
Remove tension from UAS belt
by pushing down on side of child
restraint with UAS adjuster. Then press
adjuster button to loosen belt.
Unhook UAS from bar by squeezing
spring lever, pushing hook back into
the seat bight and twisting. Then pull
it out of the vehicle seat.
Store UAS when not in use. See
page 25.
you can try:
44