Safety 1st Alpha Omega 65 Manuel De L'utilisateur page 20

Hook UAS to Vehicle
9.
Anchor
10. Tighten Belt
Place hand in child restraint.
Firmly push down and
towards the vehicle seat back
while pulling free end of belt to
tighten.
It may be easier to pull pad
away from shell and tighten
the belt through the belt path
opening as shown.
11. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than 2.5
cm (1 in.).
If it moves more than 2.5 cm (1 in.),
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
33
you can try:
12. Secure Child in Child
Restraint
Recheck the level lines to make
sure it is reclined according to
your child's weight.
Repeat steps 8-11 if not reclined
correctly.
You may need to place a large
rolled towel(s) or foam pool
noodle(s) under front of child
restraint to help achieve the
correct recline angle.
Check often to be sure padding is
still in place and the belt is tight.
To Release UAS
Remove child from child restraint.
Remove tension from UAS belt
by pushing down on side of child
restraint with UAS adjuster. Then
press adjuster button to loosen belt.
Unhook UAS from bar by squeezing
spring lever, pushing hook back into
the seat bight and twisting. Then pull
it out of the vehicle seat.
Store UAS when not in use. See
page 25.
34