2.
Remove UAS from
Storage Location
3.
Route UAS Hook
Through the Forward-
Facing Belt Path
The UAS adjuster can be on either
side.
4.
Reach Under Pad and
Pull Hook Down and
Out of the Rear Facing
Belt Path As Shown
5.
Pull Hook Across
to Opposite Side
Do not twist belt.
Belt
strap and under pad.
31
MUST
be behind buckle
6.
Finished UAS Routing
Replace pad over corners.
7.
Fully Recline the
Child Restraint
Pull out on recline handle and
push top of child restraint back.
8.
Place Child Restraint
Rear Facing in Back
Seat
For children between 2.3-10 kg
(5-22 lb), the bottom level line on
shell
MUST
be parallel with the
ground.
For children 10.1-18 kg
(22-40 lb) who can sit up
unassisted, rotate the child
restraint between the 2 level lines.
Start by making the bottom level
line parallel with the ground, then
rotate seat up. Do not rotate past
the top level line.
continued on next page
32